CAP AND PIN TYPE SUSPENSION INSULATORS
TOUGHENED GLASS SUSPENSION INSULATORS
The following line post insulators comply with the ANSI Standard. The glaze colors of the insulators are brown or light gray.
Dimensions:
Diameter (D): 6 11/16 Inches (170mm)
Height (H): 13 1/4 Inches (336mm)
Leakage Distance: 21 Inches (534mm)
Dry Arcing Distance: 10 1/2 Inches (267mm)
Mechanical Values:
Cantilever Strength: 2,800Pounds (12.5kN)
Cantilever Strength Routine Test: 1,000Pounds (5kN)
Electrical Values:
Typical Application Voltage: 25kV
Low Frequency Dry Flashover Voltage: 110kV
Low Frequency Wet Flashover Voltage: 85kV
Critical Impulse Flashover Voltage, Positive: 180kV
Critical Impulse Flashover Voltage, Negative: 205kV
Radio Influence Voltage Data:
Test Voltage RMS to Ground: 22kV
Maximum RIV at 1000 kHz: 100μV
Packing and Shipping Data
Net Weight, Approximate: 9.5kg