CAP AND PIN TYPE SUSPENSION INSULATORS
TOUGHENED GLASS SUSPENSION INSULATORS
The following line post insulators comply with the ANSI Standard. The glaze colors of the insulators are brown or light gray.
Dimensions:
Diameter (D): 6 11/16 Inches (170mm)
Height (H): 10 1/4 Inches (260mm)
Leakage Distance: 14 3/8 Inches (365mm)
Dry Arcing Distance: 6 1/2 Inches (165mm)
Mechanical Values:
Cantilever Strength: 2,800Pounds (12.5kN)
Cantilever Strength Routine Test: 1,000Pounds (5kN)
Electrical Values:
Typical Application Voltage: 15kV
Low Frequency Dry Flashover Voltage: 80kV
Low Frequency Wet Flashover Voltage: 60kV
Critical Impulse Flashover Voltage, Positive: 130kV
Critical Impulse Flashover Voltage, Negative: 155kV
Radio Influence Voltage Data:
Test Voltage RMS to Ground: 15kV
Maximum RIV at 1000 kHz: 100μV
Packing and Shipping Data
Net Weight, Approximate: 4.8kg